Metal Brackets
All our metalwork is handcrafted by our skilled steel fabricator, located in West Sussex.
Every bracket is deburred so that no sharp edges are present. The bracket holes are 6mm Diameter.
Our External brackets can be used on solid & plasterboard walls, however we only supply solid wall plugs.
Cleaned & Prepared
Before every order is sent out, we clean all our metalwork with a water displacing formula. This cleans off any dirt that may be on the steel & provides a rust resistant finish.
Pilot Drill Bit
We include a 3mm drill bit with every order to help with the accuracy and ease of installation. By drilling a pilot hole, this allows the screw to easily bite into the wood.
Fixings Screws
Black carbon steel screws are supplied with every order. We have two sizes of screw (50m & 25mm). The fixing pack you recieve have been hand picked especially for your product, this ensure you always receive the correct fixings.
Floating Brackets
Designed with an offset CAM, giving you 10mm of adjustment on the concealed rods. Allowing you to get the shelf absolutely plum during installation.
Our Floating shelves have a maximum weight capacity of 35kg.
These concealed brackets can only be installed on solid walls, they are not suitable for plasterboard.
Predrilled Holes
Every floating has predrilled holes in the back of the shelf (13mm Diameter). Before leaving our workshop every shelf is drilled by hand & checked, allowing us to make sure the floating rods are a secure snug fit.
The Concealed fixings are 12mm Diameter & 120mm Length. The screw section for the wall is 65mm Length.
Concealed Fixings
Our Floating rods are designed with an offset CAM, giving you 10mm of adjustment on the concealed rods.
This allows you to get the shelf absolutely plum during installation. To adjust the floating rod, use a 10mm spanner to spin the rod.
Pipe Brackets
All our Pipe Brackets are cast steel.
Every bracket is made up by hand so that no sharp edges are present & the pipework secure. The bracket holes are 6mm Diameter.
Our External brackets can be used on solid & plasterboard walls, however we only supply solid wall plugs.
Cleaned & Prepared
Before every order is sent out, we clean all our metalwork with a water displacing formula. This cleans off any dirt that may be on the steel & provides a rust resistant finish.
Pilot Drill Bit
We include a 3mm drill bit with every order to help with the accuracy and ease of installation. By drilling a pilot hole, this allows the screw to easily bite into the wood.
Fixings Screws
Black carbon steel screws are supplied with every order. We have two sizes of screw (50m & 25mm). The fixing pack you recieve have been hand picked especially for your product, this ensure you always receive the correct fixings.
Metal Furniture Legs
All our Box-Frame & Hairpin furniture legs are powdercoated - (the ultimate protection).
Our furniture is also supplied in flatpack form. We use steel fixing strips to attach the wooden planks together.
These fixing strips easily attach to the underside of the table using the wood screws supplied.
Metal Legs
Our metal Legs have been cleaned & prepped with a Lithium Grease. This cleans the hairpins and provides a rust resistant finish.
A 3mm Drill Bit is also supplied to help with installation of the furniture.
Fixing Strips
All our furniture is supplied in flatpack form. We use steel fixing strips to attach the wooden planks together.
These fixing strips easily attach to the underside of the table using the black wood screws supplied.
Metal Screws
We supply silver Carbon Steel wood screws with all our orders. These twin-threaded PZ2 wood screw are perfect to complement our rustic metalwork.
we supply extra screws for your peace of mind.
Fireplace Mantels
Every Mantel comes with pre-attached stainless steel keyhole fixings.
Two screws( 75mm length) along with two solid wall plugs are supplied with every Mantel for installation.
These keyhole brackets can only be installed on solid walls, they are not suitable for plasterboard.
Keyhole Fixings
Every Mantel comes with pre-attached stainless steel keyhole fixings. Before leaving our workshop every Mantel is checked, allowing us to make sure the fixings are secure & ready for installation.
Fixing Screws
Two screws ( 75mm length) along with two solid wall plugs are supplied with every Rustic Mantel for installation.